C++ Programming Specialists Kualalumpur Near Me

4worldlovers:
YES graduates consistently find work in some of the most interesting jobs available in the market. Sometimes even before graduation.


Our teachers are all working professionals in the fields they are teaching. Our students have access to the latest industry knowledge.


Enjoy the best tertiary education, the most exciting college lifestyle all at the most affordable rates offered in Malaysia.


Students will experience refreshed courses that have been heavily scrutinized and modified by our independent industry panels.


To provide world-class, high quality, innovative and career-focused education towards building solid foundation

Learn English for life, Travel or for further study to achieve your academic, Professional and Personal goals. To enable effective communications amongst people across borders and cultures worldwide.

Mr. T. SEELAN C.A (M) FCCA specialises in designing and setting up of accounting, internal control and operational systems as well as in performing operational audits.

His working experience includes years at several public accounting firms and a large tax firm . He also acts as a consultant for a number of groups on financial issues.

He has trained accountants and financial advisors in Brunei, Vietnam, East Africa and Malaysia for accountants. These programs have produced excellent feedback. He has been actively involved in accounting courses as a lecture, specializing in taxation, audit and accounting for the last 25 years. Has taught ACCA extensively in other Countries also.

Mr. ARSHAD ADAM trained as a Chartered Accountant and holds a Masters in International Business Management with distinction from the University of Nottingham.

Arshad has > 25 years of professional teaching experience in many countries including at several ACCA platinum schools. He is highly experienced in teaching Performance Management at many levels and was awarded the Best Management Accounting Lecturer – National Award for Management Accounting (NAfMA) by CIMA and MIA in 2014. He is well-known for being passionate in helping his students pass their exams.

Mr IAN LIM-A Chartered Accountant in Malaysia and a Fellow Member of the Association of Chartered Certified Accountants (FCCA), ASEAN CPA, Master of Science in Accounting and Financial Management.

More than 25 years of lecturing experience in accounting and finance related subjects Lectured internationally in Malaysia, China, Brunei, Hong Kong, Vietnam, Africa and Singapore Produce a total of 37 prize winners both Malaysia and Singapore since 2007 Outstanding lecturer award by SAA Global Education, Education Arm of Institute of Singapore Chartered Accountants (ISCA) in 2013. Project Mentor since 2008 for the Oxford Brookes Programme Widely recognised for his simple teaching techniques that turn a difficult topic into an enjoyable learning experience

Specializes in lecturing financial reporting and business reporting subjects for degrees, masters, and professional courses.

He has more than 20 years of experience in lecturing and training, at various leading colleges and training institutions in the country.

Ms. R. GEETHA has been teaching Management Accounting (MA) in the CAT/ACCA programme for over 17 years, successfully producing Malaysian and World Prize winners almost every year for CAT MA1 and MA2. Her interactive, and generally vibrant, dynamic and hands-on kind of teaching methods have helped her upkeep very high passing rates for CAT MA1, MA2 and FMA, and ACCA Performance Management throughout these years. She is also known for her empathetic behaviour towards her students, which is why she keeps a close tab on students’ learning and progress beyond her classrooms. Having earned yet another degree, one in Jurisprudence (UM), Ms. R. Geetha is all set to emulate her MA teaching strategies to ensure students’ success in the ACCA Corporate and Business Law (MY).

Mr. Gan Soon Shyang-A Chartered Accountant in Malaysia and a Fellow member of Association of Chartered Certified Accountants is currently practising in accountancy, tax and corporate advisory, with vast experience in SME industries.

While practising on his own, he has also actively participated in training and lecturing tax papers across Malaysia and China. His programs have received favourable reviews. Mr. Gan was invited by Royal Malaysian Customs, Sandakan, and Malaysian Institute of Accountants as a facilator to provide training for member of the public. He is also actively involved in tax tribunals representing his clients in disputed cases.

4worldlovers:
This simple part has four M12 holes, drilled, countersunk and tapped. The datum is the centre of the part so the holes positions are.


The machine first moves to X-55. Y-55. and rapids the Z axis to 3mm above the part.

The G95 selects feed per revolution which means we only need to program the tap pitch for the feed-rate.


The M29 engages the rigid tapping mode and the S800 is the speed. (It does not start the spindle)

It then rapids the Z axis down to 1mm above the part R1.

The G84 Cycle instructs it to tap a hole 17.mm deep (Z-17.) at a feed of 1.75mm per revolution (F1.75)

So it feeds at 1.75mm per revolution with the spindle turning clockwise to depth.


At the bottom of the hole it reverses the spindle and feeds back to the initial point.

If it were G99 it would return to 1mm above the job (R1.)

Once the cycle is active each time it sees a position it repeats the tapping process.

Single block and feedhold do not work in a tapping cycle.

Now watch the video to see it all in action (not breaking the tap).

If you have been affected by any of the issues in this post or need CNC Counselling then contact me.

CNC touch probe, everyone should have an electronic probe on their machine but I’m sure there are lots of reasons why you don’t have one.

The purpose of this article is to show some of the alternatives to buying an expensive touch probe systems. Please note if you can afford to one of these systems I’ll guarantee you’ll soon get your money back with increased productivity.

Now I know there is a lot of this about but if you’re guilty then I’m sorry but you deserve all you get.

Yes you know who you are. Yes you, you with that gorgeous once shiny Renishaw CNC touch probe left to get covered in grease, shit and swarf in the back of your machining centre.

Yes I regularly come across this when training people onsite on their CNC Machines. The machine originally came with a touch probe and maybe got used a few times but then no one bothered to properly learn how to use it.


Most likely the bloke who knew how to use it left to buy a chip shop in Bradford.


As a result it was ignored for three years and left in the tool carousel to generally decay and rot.

Please sort it there’s a lot of cash sat there in the tool carousel oh and don’t leave your dirty pants lying around either.


Maybe you call them wibblers never mind the fuckin semantics they are basically a piece of shit on a stick. Bin them.


Now I’m an old school engineer I remember the old halcyon days of engineering. I have the missing limbs, teeth and scars to prove it.

Using your finger as a work steady on a long component.


Making star shapes in sheet steel to throw up and stick in the ceiling of the sheet metal training department at Rolls Royce.


Listen to David “it’s time to let this shit go”

You might be stuck in a 1950’s time warp but it’s costing you money.


When you use a Wibbler there are so many things to go wrong. Get the speed wrong and it will kick off at the wrong point. If you don’t engage it far enough down the part it will probably snap off.

Maybe if you practice for long enough you can set a datum in less than an hour.

Just bin it and spend just a small amount of cash on some of the more up to date solutions.

Buy a full blown probing system such as Renishaw, Blum, M & H.

In that order the costs are thousands, hundreds, tens and units.

4worldlovers: Language Solutions is a language service provider offering distinct language services. We have an experienced team, flexible pricing structures, and international quality certification.

Each job is assigned to linguists who are specialised in various fields and languages.

Highly recommended. The Language Solutions team steered us through the cumbersome process of obtaining a power of attorney document to be used abroad, and did so efficiently and at reasonable cost. The team collected and delivered the documents at every step of the process and kept us informed about their status. I loved the ease of communication with them, and the fact that they never hesitated following up with my embassy. The translation itself was done quickly and accurately.

4worldlovers:
Whether you are a business owner or manager looking to upgrade your team with technology training, or an individual looking to advance your career in IT, New Horizons Kuala Lumpur has a complete selection of technology, applications, and business skills training.

For over 30 years, New Horizons Kuala Lumpur has provided innovative learning solutions that have transformed businesses and helped millions of students advance their career goals.

When you're looking for a meeting space or renting a training facility, New Horizons Kuala Lumpur can help.

New Horizons has everything you need to provide a high-quality, cost-effective learning or meeting environment. We know what you need for a successful meeting because we do it every day!